prandof: Hej maš pravdu, aj som to tak spravil...ale s prepačenim opice zo shopu, kde som si napalovacku kupoval mi zdôraznovali ze raid mam mat zapnuty. Ja som si ho vypol a vyhodilo mi ju pekne uz v biose ale vo wine ešte nie. Potom ešte chcelo nainstalovať ovladac VIA SATA RAID Controller. Tak som ho doinstaloval z CD ku matičnej. Uz mi ju zobrazovalo aj vo wine.
ALE PRE ZMENU MAM ZASE INY PROBLEM:
DVD mechanika funguje skoro ako ma. Ale takto. Myslim ze som setko spravil dobre. Určite sa s tou atovou nebije. Aspon si myslim ze by to vadit nemalo.
Lenze. DVD filmy mi čita. Šetko v pohodke. Ale išiel som si napaliť film. Nie z originalneho CD ale z napaleneho. A čo nevidim? Nechce mi napalovať. Myslel som si že to bude tym že som mal nastavenu maximalnu rychlost zapisu. Prepol som na 8x. Potom mi raz napalilo a dalši krat zase nechce a hlasi chybu. Nevytačalo by ma to aš tolko, kebyze nato dvd nezapiše nažiatočnu stopu a znehodnoti ho a dvd možem vyhodit. Takto som uz "zničil" cca 10 dvd a mam nervy(používal som DVD-R a boli to PHILIPS a TRAXDATA a pri obidvoch mi vypisalo chybu a ten jeden uspešný zapis bol na PHILIPS
) Čitať čita, ale napalovať nechce. Ako vlozim prazdne dvd na zapisanie vytvoreneho obrazu filmu na dvd vypiše mi chybu.
Vobec totalne tomu nechapem. Hážem sem log z hlasenia chyby ktora vyskoči po nevydarenom napaleni. Netušim či to aj tak pomože ten log. Ja uš som fakt mimo a nechapem ničomu a pravdu povediac už mam nato poriadne nervy lebo už neviem čo robiť. Poradte prosim budem vam vdacny.
Log:
AnRy
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.2.8.0
Internal Version: 8, 2, 8, 0
Recorder: <HL-DT-ST DVDRAM GH22NS40>Version: NL01 - HA 1 TA 0 - 8.2.8.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVDRAM GH22NS40 >Version: NL01 - HA 1 TA 0 - 8.2.8.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-STDVDRAM GH22NS40 NL01 viamraid Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GH22NS40 F: CdRom0
HL-DT-ST RW/DVD GCC-4521B E: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523504kB)
Free physical memory: 392MB (401512kB)
Memory in use : 23 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.12.2009
===== Disc-Copy over image - 1st step : Copy to image ...
17:18:28 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
17:18:29 #2 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
17:18:29 #3 Text 0 File DVDCopy.cpp, Line 320
DVD Track-Information from source disc:
Media Type: DVD+R
S01 T01 Con 0x14 Start 0 Len 2289392 NWA -1 (gap 0) Blank 0 Res 1 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
17:18:29 #4 Text 0 File DVDCopy.cpp, Line 435
Max -1 tracks of 1 allowed to copy
1: 0 - 2289392 = 2289392, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
17:18:29 #5 Text 0 File Burncd.cpp, Line 3502
Turn on Disc-At-Once, using DVD media
17:18:29 #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 2289391 (508:45.16, 4471MB)
17:18:29 #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
17:18:29 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
17:18:29 #9 Text 0 File ThreadedTransferInterface.cpp, Line 762
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Dáta (režim 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2289392 (2289392) = #2289392/508:45.17
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2289392 blocks [Image Recorder]
--------------------------------------------------------------
17:18:29 #10 Text 0 File ThreadedTransferInterface.cpp, Line 964
Prepare [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4688674816, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2289392 | 2289392 | 0x00
2289392 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
17:18:29 #11 Text 0 File Burncd.cpp, Line 4288
Caching options: cache CDRom or Network-No, small files-No (<64KB)
17:18:29 #12 Phase 120 File dlgbrnst.cpp, Line 1767
Creating the image for burning
17:18:29 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2681
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
17:18:29 #14 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400
17:34:58 #15 Text 0 File WriterStatus.cpp, Line 240
<Image Recorder> start writing Lead-Out at LBA 2289392 (22EEF0h), length 0 blocks
17:34:59 #16 Phase 121 File dlgbrnst.cpp, Line 1767
Creating Image completed successfully
17:35:00 #17 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
17:35:07 #18 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
17:35:07 #19 Text 0 File Cdrdrv.cpp, Line 11391
DriveLocker: UnLockVolume completed
===== Disc-Copy over image - 2nd step : Burn the image ...
17:35:22 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
17:35:57 #2 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4688674816
CUES:
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <D:\Moje dokumenty\TempImage.nrg>
17:35:59 #3 SPTI -1196 File SCSIPassThrough.cpp, Line 197
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x049bc380: Len x20
17:35:59 #4 SPTI -1196 File SCSIPassThrough.cpp, Line 197
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x049bc380: Len x20
17:35:59 #5 SPTI -1196 File SCSIPassThrough.cpp, Line 197
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x049bc380: Len x20
17:35:59 #6 SPTI -1196 File SCSIPassThrough.cpp, Line 197
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x049bc380: Len x20
17:35:59 #7 SPTI -1196 File SCSIPassThrough.cpp, Line 197
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x049bc380: Len x20
17:35:59 #8 Text 0 File Burncd.cpp, Line 3502
Turn on Disc-At-Once, using DVD media
17:36:00 #9 SPTI -1196 File SCSIPassThrough.cpp, Line 197
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x049bc380: Len x20
17:36:00 #10 SPTI -1196 File SCSIPassThrough.cpp, Line 197
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x049bc380: Len x20
17:36:00 #11 SPTI -1196 File SCSIPassThrough.cpp, Line 197
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x049bc380: Len x20
17:36:00 #12 SPTI -1196 File SCSIPassThrough.cpp, Line 197
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x049bc380: Len x20
17:36:00 #13 SPTI -1196 File SCSIPassThrough.cpp, Line 197
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x049bc380: Len x20
17:36:32 #14 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2289391 (508:45.16, 4471MB)
17:36:32 #15 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
17:36:32 #16 Text 0 File DlgWaitCD.cpp, Line 2957
Recorder: HL-DT-ST DVDRAM GH22NS40, Media type: DVD-R
Disc Manufacturer ID: <RITEKM> <16>
Disc Application Code: 64, Disc Physical Code: 193
17:36:32 #17 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Neznáma. Medium required by compilation: DVD R/RW; DVD DL; DVD-RAM.)
17:36:32 #18 Text 0 File ThreadedTransferInterface.cpp, Line 762
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 2289392 (2289392) = #2289392/508:45.17
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2289392 blocks [F: HL-DT-ST DVDRAM GH22NS40]
--------------------------------------------------------------
17:36:32 #19 Text 0 File ThreadedTransferInterface.cpp, Line 964
Prepare [F: HL-DT-ST DVDRAM GH22NS40] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4688674816, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2289392 | 0 | 0x00
2289392 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
17:36:32 #20 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
17:36:32 #21 Text 0 File Burncd.cpp, Line 4288
Caching options: cache CDRom or Network-No, small files-No (<64KB)
17:36:32 #22 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 16x (22 160 KB/s)
17:36:33 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2681
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
17:36:33 #24 Text 0 File DVDR.cpp, Line 3273
Recording mode: Sequential Recording Mode
17:36:33 #25 Text 0 File DVDR.cpp, Line 3427
Start write address at LBA 0
DVD high compatibility mode: Yes
17:36:33 #26 Text 0 File Cdrdrv.cpp, Line 10140
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 26127F h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 2FE10 h
Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h
Media Specific [16..783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01 40 C1 FD 9E D8 52 00 - 02 85 0D 0E 88 9A 80 00 .@....R.........
03 52 49 54 45 4B 4D 00 - 04 31 36 00 00 00 00 00 .RITEKM..16.....
05 88 80 00 00 00 02 00 - 06 09 0B 14 87 78 90 00 .............x..
07 88 80 00 00 00 00 00 - 08 08 13 0D 11 0C 08 00 ................
09 95 07 0E 0B 78 88 00 - 0A A0 00 20 00 20 10 00 .....x..........
0B 06 1A 17 86 67 85 00 - 0C 99 AB 3A 83 20 32 00 .....g.....:..2.
0D 00 00 D0 00 00 00 00 - 0E 0A 24 35 2F 29 1A 00 ..........$5/)..
0F 50 1B 29 17 97 B5 00 - 10 88 80 00 00 00 00 00 .P.)............
11 00 00 00 00 00 00 00 - 12 09 2E 37 2F 29 19 00 ...........7/)..
13 50 1B 29 17 97 B5 00 - 14 88 80 00 00 00 00 00 .P.)............
15 00 00 00 00 00 00 00 - 16 09 3F 44 3D 24 29 00 ..........?D=$).
17 60 1F 2F 1D 97 B5 00 - 18 88 84 00 04 00 04 00 .`./............
19 00 00 00 00 00 00 00 - 1A 08 57 46 42 27 24 00 ..........WFB'$.
1B 70 1F 2B 0F AA B5 00 - 1C 88 84 00 04 00 04 00 .p.+............
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
17:36:33 #27 Text 0 File DVDR.cpp, Line 3565
Reserved Track size: 2289392 (22EEF0h, 4471MB) -> return code 0
17:36:33 #28 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 74390400
17:36:53 #29 Text 0 File Cdrdrv.cpp, Line 1402
17:36:53.359 - F: HL-DT-ST DVDRAM GH22NS40 : Queue again later
17:36:53 #30 SPTI -500 File SCSIPassThrough.cpp, Line 197
CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500)
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x07900040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
17:36:57 #31 SPTI -1114 File SCSIPassThrough.cpp, Line 197
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 0C 29
Buffer x074c1400: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
17:36:57 #32 CDR -1114 File Writer.cpp, Line 306
Reset occurred
F: HL-DT-ST DVDRAM GH22NS40
17:37:00 #33 Text 0 File DVDR.cpp, Line 3833
EndDAO: Last written address was -1 (FFFFFFFFh)
17:37:00 #34 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 16x (22 160 KB/s)
17:37:00 #35 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
17:37:06 #36 Text 0 File Cdrdrv.cpp, Line 11391
DriveLocker: UnLockVolume completed
17:37:06 #37 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
.
